29
Chapter 4
Configure the Router in Wireless Router Mode
Note:
If there is no available WAN connection to choose, make sure you have connected to the
Internet and the connection type is not Bridge.
Now you can visit the IPv6 websites with the 6rd tunnel.
Note:
The way to set up DS-Lite tunnel is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN connection
and have signed up for DS-Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above.
4. 4. Wireless
4. 4. 1. Wireless Settings
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Wireless > Wireless Settings.
3. Configure the basic settings for the wireless network and click Save.
Done!
To Next Page
Loading...
