TP-Link TL-WR850N - IP & MAC Binding

45
Chapter 4
Configure the Router in Wireless Router Mode
3) Click Block above the Online Devices table. The selected
devices will be added to Devices in Blacklist automatically.
To allow specific device(s)
1) Select Whitelist and click Save.
2) Click Add.
3) Enter the Device Name and MAC Address (You can copy and
paste the information from Devices Online table if the device
is connected to your network).
4) Click Save.
Now you can block or allow specific client devices to access your
network (via wired or wireless) using the Blacklist or Whitelist.
4. 6. 4. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with matching IP address in
the Binding list, but unrecognized MAC address.
Prevent ARP spoofing and ARP attacks.
1. Visit http://tplinkwifi.net, and log in with the password you
set for the router.
2. Go to Advanced > Security >IP & MAC Binding and enable IP
& MAC Binding.
Done!
I want to:
How can I
do that?