41
Chapter 4
Configure the Router in Wireless Router Mode
2. Go to Forwarding > UPnP.
3. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your
needs..
4. 6. Security
This function allows you to protect your home network from cyber attacks and
unauthorized users by implementing these network security functions.
4. 6. 1. Firewall & DoS Protection
The SPI (Stateful Packet Inspection) Firewall and DoS (Denial of Service) Protection
protect the router from cyber attacks.
The SPI Firewall can prevent cyber attacks and validate the traffic that is passing
through the router based on the protocol. This function is enabled by default, and it’s
recommended to keep the default settings.
DoS Protection can protect your home network against DoS attacks from flooding your
network with server requests. Follow the steps below to configure DoS Protection.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced .> Security > Firewall & DoS Protection.
To Next Page
Loading...
