37
Chapter 4
Configure the Router in Wireless Router Mode
visit my website in some way. The PC is connected to the router
with the WAN IP address 218.18.232.154.
Router
WAN: 218.18.232.154
LAN
Home
Personal Website
1. Assign a static IP address to your PC, for example
192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the password you
set for the router.
3. Go to Advaced > NAT Fowarding > Virtual Servers.
4. Click Add. Click Scan and choose HTTP. The External Port,
Internal Port and Protocol will be automatically filled in. Enter
the PC’s IP address 192.168.0.100 in the Internal IP field.
5. Click Save.
Tips:
• It is recommended to keep the default settings of Internal Port and Protocol if you
are not clear about which port and protocol to use.
• If the service you want to use is not in the Service Type, you can enter the
corresponding parameters manually. You should verify the port number that the
service needs.
How can I
do that?
To Next Page
Loading...
