120
Chapter 15
Quality of Service
4. Enter a Queue Name.
5. Select Interface.
6. Enter queue’s Shaping rate.
7. Select the scheduling algorithm according to your needs.
• SP (Strict Priority): Select this if you want to ensure services in higher-priority queues.
The router will process outgoing traffic from the highest-priority queue first, then
from a lower-priority queue.
• WRR (Weighted Round Robin): Select this if you want to balance traffic in queues
proportional to their queue weight. The router will process more packets in a queue if
the queue has a higher weight.
8. Select queue’s Precedence if queue’s algorithm is SP.
9. Enter queue’s Weight if queue’s algorithm is WRR.
To Next Page
Loading...
