130
Chapter 15
Network Security
3. Bind your device(s) according to your needs.
To bind the connected device(s):
1 ) Select the device(s) to be bound in the ARP List.
2 ) Click Bind to add to the Binding List.
To bind the unconnected device:
1 ) Click Add in the Binding List section.
2 ) Enter the MAC address and IP address that you want to
bind.
3 ) Select the Enable This Entry check box to enable the
entry and click Save.
Enjoy the internet without worrying about ARP spoofing and
ARP attacks.
Done!
To Next Page
Loading...
