Trace2O HT1000 User Manual

HT1000_0.5 09/2015
13
F3
Test
Test
Zero
Storage: 900
free records left
Storage: only 29
free records left
Zero accepted
prepare Test
press TEST
prepare Zero
press ZERO
Note:
The display shows the number of free data sets.
If there are less than 30 data sets free the display shows:
Clear the memory as soon as possible (see “Deleting stored
results”). If memory capacity is used up it is impossible to save
additional test results.
2.3.9 Printing results (T2o PC-Link) (optional)
If the PC-Link module (see chapter 2.5) is switched on and the printer is connected, it is possible to
print out the test results (without saving it beforehand).
Press [F3] key.
The entire data set is printed with date, time, Code No.,
method and test result. Printing example:
The test No. is an internal number that is set automatically
if a test result is stored. It appears only on the print out.
2.3.10 Perform additional measurements
To perform additional tests using the same method:
• Press [TEST] key
The display shows:
Confirm with [TEST] key
or
• Press [ZERO] key to perform a new zero calibration.
The display shows:
100 Chlorine T
0.02-6 mg/l Cl
2
Profi-Mode: no
2009-07-01 14:53:09
Test No.: 1
Code-Nr.: 007
4.80 mg/l Cl
2

Trace2O HT1000 Specifications

General

Brand	Trace2O
Model	HT1000
Category	Measuring Instruments
Language	English