Trace2O HT1000 - Printing of Stored Results

20
HT1000_0.5 09/2015
<Print>
Print all Data
Start:
cancel:
ESC
Mode
0
2
2.4.2 Printing of stored results
Printing all results
Press [MODE], [Shift] + [2][0] keys.
Confirm with [ ] key.
The display shows:
Press [ ] key for printing out all stored test results.
Test No.:
The display shows e.g.:
After printing the photometer goes back to <Mode-Menu>
automatically.
Note:
It is possible to cancel the entry by [ESC].
All stored data are printed out.
See chapter 2.5.1 Data Printing.