Trace2O HT1000 - Selecting a New Method; Measure Absorbance

14
HT1000_0.5 09/2015
Esc
1
6
0
900 mAbs 430 nm
-2600 mAbs - + 2600 mAbs
prepare Zero
press ZERO
Zero accepted
prepare Test
press TEST
2.3.11 Selecting a new method
Press [ESC] key to return to method selection.
Or enter the required method number directly,
e.g. [Shift] + [1][6][0] for CyA-TEST (Cyanuric acid).
Confirm with [ ] key.
2.3.12 Measure absorbance
Range: –2600 mAbs to +2600 mAbs
Method-No.
Title
900
mAbs 430 nm
910
mAbs 530 nm
920
mAbs 560 nm
930
mAbs 580 nm
940
mAbs 610 nm
950
mAbs 660 nm
Select the desired wavelength from the method list or by entering the corresponding method
number directly.
The display shows e.g.:
Always carry out zeroing using a filled (e.g. deionised water)
vial.
The display shows:
Carry out measurement of the sample.
500 mAbs
The display shows e.g.:
TIP: To ensure complete reaction times the user countdown may be helpful (chapter 2.2.3, page
290).