3.3
Technical data
Display
Graphic Display with backlight
Serial Interface IR interface for data transfer
RJ45 connector for internet updates (see chapter 2.5.3)
Light source light-emitting diode – photosensor – pair arrangement
in a transparent measurement chamber
Wavelength ranges:
1 = 530 nm IF = 5 nm
2 = 560 nm IF = 5 nm
3 = 610 nm IF = 6 nm
4 = 430 nm IF = 5 nm
5 = 580 nm IF = 5 nm
6 = 660 nm IF = 5 nm
IF = Interference filter
Wavelength accuracy
± 1 nm
Photometric accuracy* 2% FS (T = 20°C – 25°C)
Photometric resolution 0.005 A
Measuring range of absorbance -2600 - 2600 mAbs
Protection conforming to IP 68 (1 h, 0.1 m)
Operation Acid and solvent resistant touch-sensitive keyboard with
integral beeper as acoustic indicator.
Power supply 4 batteries (Type AA/LR 6);
lifetime: approx. 26 hours continuous use or 3500 tests
Auto off 20 minutes after last function,
30 seconds acoustical signal before switch off
Dimensions
approx. 210 x 95 x 45 mm (unit)
approx. 395 x 295 x 106 mm (case)
Weight (unit)
approx. 450 g
Working condition 5 – 40°C at max. 30 – 90% relative humidity
(without condensation)
Language options English, German, French, Spanish, Italian, Portuguese,
Polish; further languages via Internet Update
Storage capacity ca. 1000 data sets
* measured with standard solutions
Subject to technical modification!
To ensure maximum accuracy of test results, always use the reagent systems supplied by the
instrument manufacturer.
To Next Page
Loading...
Need help?
General
