Trace2O HT1000 - Displaying Time and Date; User Countdown

9
Countdown
02:00
start:
0
2
0
0
Esc
Shift
F1
Countdown
mm : ss
99 : 99
2.1.2 Displaying time and date:
Press [“clock”] key.
19:30:22 2012-06-15
The display shows:
After 15 seconds the photometer reverts to the previous
display automatically
or press [ ] key or [ESC].
2.1.3 User countdown
With this function the operator is able to define his own countdown.
Press [“clock”] key.
19.30.20 2012-06-15
The display shows time and date:
Press [“clock”] key.
The display shows:
Either press [ ] key to accept the last used user countdown.
or
press any number key to start entering a new value
The entry comprises two digits each.
Enter minutes and seconds,
e.g .: 2 minutes, 0 seconds = [Shift] + [0][2][0][0].
Confirm with [ ] key.
The display shows:
Start countdown with [ ] key.
After countdown has finished the photometer reverts to the
previous display automatically.
2.1.4 Display backlight
Press the [Shift] + [F1] key to turn the display backlight on
or off. The backlight is switched off automatically during the
measurement.