2.5
Data transfer
To print data or to transmit to a PC the optional T2o PC-Link infra-red module is required.
2.5.1
Data Printing
Besides the PC-Link module the following printer is required to print data directly using the USB
Interface of the module: HP Deskjet 6940.
2.5.2
Data transfer to a personal computer
Besides the PC-LINK a transfer program, is required to transmit test results.
Please find detailed information in the PC-LINK manual or at our homepage in the download-area.
2.5.3
Internet Updates
To connect the instrument to the serial interface of a computer the optional connection cable
with integrated electronic system is required.
It is possible to update new software applications and additional languages via the internet.
Please find detailed information at our homepage in the download-area (as soon as available).
How to open and close the battery compartment cover see chapter 2.1.3!
Please Note:
To prevent loss of stored test results store or print them out before performing an Update.
If the update procedure is interrupted (eg. interruption of connection, LoBat., etc.) the
instrument isn´t able to work (no display). The instrument will only work again after
completing the data transfer.
To Next Page
Loading...
Need help?
General
