1.0 Introduction
The HT1000 is part of the HydroTest range of instruments based on optical measurement technology
for the analysis of a range of chemical parameters in aqueous samples.
The HT1000 is a photometric analyser using 6 indivdual selective wavelengths to measure the colour
change produced by a reagent when reacted with the analyte of interest.
The photometer employs the methods defined in the American Standard Methods for water analysis.
This instruction manual outlines the functions and operations of the photometric instrument only.
Instructions specific to each test are included with the reagent packs as purchased from Trace2o Ltd.
The instrument has been designed and optimized to work solely with Trace2o reagents. A complete
list of available parameters is included in Appendix 1.0
The instrument has been designed for use in an outdoor environment and is rugged and waterproof
however the optical system should also be checked for cleanliness before use particularly
condensation build up in the cell chamber.