<Profi-Mode>
ON : 1 OFF : 0
2.4.4
Lab function
Reduced operator guidance => “Profi-Mode“
This function may be used for routine analyses with many samples of one method.
The following information is always stored in the methods:
a)
Method
b)
Range
c)
Date and time
d)
Differentiation of results
e)
Detailed operator instruction
f)
) Compliance with reaction periods
If the Profi-Mode is active, the photometer provides only a minimum of operator instructions.
The criteria specified above in d, e, f are no longer included.
Press [MODE], [Shift] + [5][0] keys in succession.
Confirm with [ ] key.
The display shows:
•
Press [Shift] + [0] keys to switch the Profi-Mode off.
•
Press [Shift] + [1] keys to switch the Profi-Mode on.
switched off
or
switched on
The display shows:
Confirm with [ ] key.
Note:
Storage of test results is possible. When results are stored the display also shows “Profi-
Mode”.
The selected settings are kept by the photometer even whein it is switched off. To change
photometer setting a new setting is required.
To Next Page
Loading...
Need help?
General
