Trace2O HT1000 - Page 24

24
HT1000_0.5 09/2015
<Baud rate>
is: 19200
select: [ ] [ ]
save:
cancel:
ESC
Mode
9
2
Esc
<printing parameter>
2: Baud rate
cancel: ESC
Printing Parameter
Press [MODE], [Shift] + [2][9] keys.
Confirm with [ ] key.
The display shows:
Press [Shift] + [2] keys to select ”Baud rate”.
The display shows:
Press arrow key [ ] or [ ] to select the required baud rate.
(1200, 2400, 4800, 9600, 14400, 19200)
Confirm with [ ] key.
End with [ESC] key.
Back to Mode Menu with [ESC] key.
Back to method selection with [ESC] key.