12WX
TrafiCam with TI (9 wires)
5. Software installation
TrafiCam is set up with TrafiCam PC Tool. This PC tool is available from the installation CD delivered with TrafiCam.
Install TrafiCam PC Tool
• Insert the TrafiCam installation CD in the CD-ROM drive.
• Go to the installation of TrafiCam PC Tool.
• Follow the instructions provided by the installation wizard.
• Click Finish to complete the installation.
Set the PC port for communication
• Start TrafiCam PC Tool.
• Select the appropriate COM port as the communication port.
To verify the COM port:
• Open the Control panel of the PC
• Select System, Hardware, Device Manager and then Ports.
The port is listed with its number.
• Click Retry.
To Next Page
Loading...