TRAK K3KMX - Page 93

87
Southwestern Industries, Inc.
TRAK KMX Knee Mill, Bed Mill & ProtoTRAK KMX CNC Retrofit Safety, Programming, Operating & Care Manual
Press D for Operator Defaults/Options Codes. Input code number and
press SET.
66
Metric Boot Up Default
To have the ProtoTRAK open up in mm
measurement.
67
English Boot Up Default
To have the ProtoTRAK open up in inch
measurement.
79
Turn On Beeper
Turn the beeper on when pressing keys on
either of the front panels
80
Turn Off Beeper
Turns the beeper off when pressing keys
140
Step Over for Pockets and
Face Mill
Allows user to set step over distances
345
Set Part Program Location
Sets the location of part program storage
between a USB device and to a network
For other codes and more explanation for these, please see ProtoTRAK KMX
Safety, Installation, Maintenance, Service and Part List Manual; part number
29777 or 29780.