Trane BMSC000AAA011000 - User Manual

SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-
conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment
by an unqualified person could result in death or serious injury.When working on the equipment, observe all precautions in the literature and
on the tags, stickers, and labels that are attached to the equipment.
Tracer
™
SC System Controller
Daily Operations
Guide
BAS-SVU025A-EN
November 2013

Trane BMSC000AAA011000 Specifications

General

Product Type	Building Management System Controller
MPN	BMSC000AAA011000
Manufacturer	Trane
Communication Protocol	BACnet
Supply Voltage	24 VAC
Input Voltage	24 VAC
Operating Temperature	-40°C to 70°C

Summary

Product Overview

Licensing and Hardware

Setup Requirements

Outlines the necessary prerequisites for setting up and operating the Tracer SC system.

Navigating the User Interface

Applying the Table Filter

The Navigation Tree

Using the Navigation Tree

Editing the Navigation Tree

Alarms and Events Log

Taking Action on an Alarm

Describes the steps to manage active alarms, such as acknowledging or commenting.

Reports

Create a Report

Provides step-by-step instructions for generating new reports, including scheduling.

Export a Report

Data Logs

Creating a Scheduled Data Log

Guides users through the process of setting up data logs to collect information on a schedule.

Triggered Data Logs

Explains how to configure data logs that initiate collection based on specific trigger conditions.

Equipment

Schedules

Optimal Start;Stop

Creating a Schedule

Provides a wizard-driven guide for creating new time-based schedules for the system.

Points

Point Types

Point Overrides

Overriding a Point

Explains how users can manually control point values, overriding system defaults.

Using the Override Dialog Box

Tools

Backup and Restore

Explains the process of backing up and restoring Tracer SC system configurations.

LEDs and the 7-Segment Display

Powering Up;Powering Down the Tracer SC

The LEDs and the 7-Segment Display

Interpreting the LEDs

Identifies and explains the meaning of various LED activities on the Tracer SC.

Interpreting the 7-Segment Display

Provides a guide to understanding the codes and messages shown on the 7-segment display.

Troubleshooting

Troubleshooting with LEDs and the 7-Segment Display

Offers solutions for common problems indicated by LED and 7-segment display behavior.

Force Return to Factory Defaults

Details the process for resetting the Tracer SC to its default factory settings.

Troubleshooting Network Connections

Provides methods and tools for diagnosing network connectivity issues with the Tracer SC.