Trane TR200 - Troubleshooting; Alarms and Warnings

15-01 Running Hours
Range: Function:
0 h* [0 - 2147483647 h] View how many hours the motor has run. Reset the counter in par.
15-07
Reset Running Hours Counter. The value is saved when the ad-
justable frequency drive is turned off.
15-02 kWh Counter
Range: Function:
0 kWh* [0 - 2147483647 kWh] Registering the power consumption of the motor as a mean value over
one hour. Reset the counter in par.15-06
Reset kWh Counter.
15-03 Power-ups
Range: Function:
0 N/A* [0 - 2147483647 N/A] View the number of times the adjustable frequency drive has been pow-
ered up.
15-04 Over Temps
Range: Function:
0 N/A* [0 - 65535 N/A] View the number of adjustable frequency drive temperature faults which
have occurred.
15-05 Over Volts
Range: Function:
0 N/A* [0 - 65535 N/A] View the number of adjustable frequency drive overvoltages which have
occurred.
15-06 Reset kWh Counter
Option: Function:
[0] * Do not reset
Select
Do not reset [0] if no reset of the kWh counter is desired.
[1] Reset counter
Select
Reset [1] and press [OK] to reset the kWh counter to zero (see par.
15-02
kWh Counter).
NOTE
The reset is carried out by pressing [OK].
15-07 Reset Running Hours Counter
Option: Function:
[0] * Do not reset
Select
Do not reset [0] if no reset of the Running Hours counter is desired.
[1] Reset counter
Select
Reset counter [1] and press [OK] to reset the Running Hours coun-
ter (par.15-01
Running Hours) and par.15-08 Number of Starts to zero
(see also par.15-01
Running Hours).
Parameter Description
TR200 Programming Guide 4-131