Main Menu - Limits/Warnings - Group 4
4-** Limits and Warnings
Parameter group for configuring limits and warnings.
Define torque, current and speed limits for the motor, and the reaction of the adjustable frequency drive when
the limits are exceeded.
A limit may generate a message on the display. A warning will always generate a message on the display or on
the serial communication bus. A monitoring function may initiate a warning or a trip, upon which the adjustable
frequency drive will stop and generate an alarm message.
4-10 Motor Speed Direction
Option: Function:
Selects the motor speed direction required.
Use this parameter to prevent unwanted reversing.
[0] Clockwise Only operation in a clockwise direction will be allowed.
[2] * Both directions Operation in both a clockwise and anti-clockwise direction will be al-
lowed.
NOTE: The setting in par.4-10
Motor Speed Direction has impact on the Flying Start in par.1-73 Flying Start.
4-46 TR200 Programming Guide
To Next Page
Loading...
