Parameter Description
Parameter Selection
Main Menu Structure
Parameters for the adjustable frequency drive are grouped into various parameter groups for easy selection of
the correct parameters for optimized operation of the adjustable frequency drive.
The vast majority of TR200 applications can be programmed using the Quick Menu button and selecting the
parameters under Quick Set-up and Function Set-ups.
Descriptions and default settings of parameters may be found under the section Parameter Lists at the back of
this manual.
0-xx Operation/Display 10-xx CAN Serial Communication Bus
1-xx Load/Motor 11-xx LonWorks
2-xx Brakes 13-xx Smart Logic Controller
3-xx Reference/Ramps 14-xx Special Functions
4-xx Limits/ Warnings 15-xx Adjustable Frequency Drive Information
5-xx Digital In/Out 16-xx Data Readouts
6-xx Analog In/Out 18-xx Info & Readouts
8-xx Comm. and Options 20-xx Adjustable Frequency Drive Closed-loop
9-xx Profibus 21-xx Ext. Closed-loop
22-xx Application Functions
23-xx Time Based Functions
24-xx Application Functions 2
Main Menu - Operation and Display - Group 0
0-** Operation / Display
Parameters related to the fundamental functions of the adjustable frequency drive, function of the keypad but-
tons and configuration of the keypad display.
Parameter group for basic adjustable frequency drive settings.
TR200 Programming Guide 4-1
To Next Page
Loading...
