Trane TR200 - Main Menu - Time-Based Functions - TR200 - Group 23

22-76 Interval between Starts
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
22-77 Minimum Run Time
Range: Function:
0 s* [Application dependant] Sets the time desired as minimum run time after a normal start command
(Start/Jog/Freeze). Any normal stop command will be disregarded until
the set time has expired. The timer will start counting following a normal
start command (Start/Jog/Freeze).
The timer will be overridden by a Coast (Inverse) or an External Interlock
command.
NOTE: Does not work in cascade mode.
Main Menu - Time-based Functions - TR200 - Group 23
23-0* Timed Actions
Use Timed Actions for actions needing to be performed on a daily or weekly basis, e.g., different references for
working hours / non-working hours. Up to 10 Timed Actions can be programmed in the adjustable frequency
drive. The Timed Action number is selected from the list when entering parameter group 23-0* from the
keypad. par.23-00
ON Time – par.23-04 Occurrence then refer to the selected Timed Action number. Each timed
action is divided into an ON time and an OFF time, in which two different actions may be performed.
NOTE
The clock (parameter group 0-7*) must be correctly programmed for timed actions to function correctly.
NOTE
When mounting an Analog I/O MCB 115 option card, a battery backup of the date and time is included.
23-00 ON Time
Array [10]
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
Parameter Description
4-192 TR200 Programming Guide