Trane TR200 - Page 171

[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reverse
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
15-13 Logging Mode
Option: Function:
[0] * Log always
Select
Log always [0] for continuous logging.
[1] Log once on trigger
Select
Log once on trigger [1] to conditionally start and stop logging using
par.15-12
Trigger Event and par.15-14 Samples Before Trigger.
15-14 Samples Before Trigger
Range: Function:
50 N/A* [0 - 100 N/A] Enter the percentage of all samples prior to a trigger event which are to
be retained in the log. See also par.15-12
Trigger Event and par.
15-13
Logging Mode.
Parameter Description
4-134 TR200 Programming Guide