[30] kg / sec.
[31] kg/min
[32] kg / hr.
[33] ton / min
[34] ton / hr.
[40] m / sec.
[41] m/min
[45] m
[60] °C
[70] mbar
[71] bar
[72] Pa
[73] kPa
[74] m WG
[75] mm Hg
[80] kW
[120] GPM
[121] gal / sec.
[122] gal/min
[123] gal / hr.
[124] CFM
[125] ft³/s
[126] ft³/min
[127] ft³/h
[130] lbs / sec.
[131] lbs / min.
[132] lbs / hr.
[140] ft/s
[141] ft/min
[145] ft
[160] °F
[170] psi
[171] lb/in²
[172] in. wtr. gage
[173] ft WG
[174] in Hg
[180] HP
NOTE: This parameter is only available when using pressure to temperature feedback conversion.
If the choice Linear [0] is selected in par.20-01
Feedback 1 Conversion, then the setting of any choice in par.
20-02
Feedback 1 Source Unit does not matter as conversion will be one-to-one.
TR200 Programming Guide 4-155
To Next Page
Loading...
