Trane TR200 - Page 201

Sets the area of the air duct at measuring point.
20-34 Fan 1 Area [m2]
Range: Function:
0.500
m2*
[0.000 - 10.000 m2]
NOTE
Units of measurement depend on the setting of
par. 0-03 Regional Settings
.
Sets the area of the air duct at measuring point.
20-35 Fan 1 Area [in2]
Range: Function:
750 in2* [0 - 15000 in2]
NOTE
Units of measurement depend on the setting of
par. 0-03 Regional Settings
.
Sets the area of the air duct at measuring point.
20-36 Fan 2 Area [m2]
Range: Function:
0.500
m2*
[0.000 - 10.000 m2]
NOTE
Units of measurement depend on the setting of
par. 0-03 Regional Settings
.
Sets the area of the air duct at measuring point.
20-37 Fan 2 Area [in2]
Range: Function:
750 in2* [0 - 15000 in2]
NOTE
Units of measurement depend on the setting of
par. 0-03 Regional Settings
.
Adjusts the density of the air in % of the normalized air density (1.2 kg/m
3
).
20-38 Air Density Factor [%]
Range: Function:
100 %* [50 - 150 %]
Parameter Description
4-164 TR200 Programming Guide