Trane TR200 - Page 285

Brake Function 2-10 4-35
Brake Power Limit (kw) 2-12
4-35
Brake Power Monitoring 2-13
4-36
Brake Resistor (ohm) 2-11
4-35
Braking Energy
2-5
Break-away Torque
2-4
Broken Belt Delay 22-62
4-191
Broken Belt Detection
4-190
Broken Belt Function 22-60
4-191
Broken Belt Torque 22-61
4-191
Bus Controlled
4-82
Bus Error Count 8-81
4-100
Bus Feedback 1 8-94
4-101
Bus Feedback 2 8-95
4-101
Bus Feedback 3 8-96
4-101
Bus Jog 1 Speed 8-90
4-101
Bus Jog 2 Speed 8-91
4-101
Bus Message Count 8-80
4-100
[Bypass Speed From Hz] 4-61
4-50
[Bypass Speed From Rpm] 4-60
4-50
[Bypass Speed To Hz] 4-63
4-50
[Bypass Speed To Rpm] 4-62
4-50
C
Changes Made 3-9
Changing A Data Value
3-17
Changing A Group Of Numeric Data Values
3-17
Changing A Text Value
3-17
Changing Data
3-16
Changing Parameter Data
3-8
Clock Fault 0-79
4-21
Clock Settings, 0-7*
4-20
Closed-loop Type 20-70
4-166, 4-170
Coast Inverse
3-10
Coasting
2-3, 3-6
Coasting Select 8-50
4-97
Comm. Option Status 16-84
4-148
Communication Option
5-11
Comparator Operand 13-10
4-109
Comparator Operator 13-11
4-109
Comparator Value 13-12
4-110
Configurable Status Word Stw 8-13
4-95
Configuration
4-95
Configuration Mode 1-00
4-22
Continuous Bin Data 23-61
4-205
Control Card Temp. 16-39
4-143
Control Profile 8-10
4-95
Control Site 8-01
4-92
Control Source 8-02
4-93
Control Timeout Function 8-04
4-93
Control Timeout Time 8-03
4-93
Control Word 16-00
4-140
Cooling
4-31
Copyright, Limitation Of Liability And Revision Rights
2-1
Cost Savings 23-84
4-208
Counter A 16-72
4-147
Counter B 16-73
4-147
Current Fault Source 16-49
4-143
Current Lim Cont, Proportional Gain 14-30
4-126
Index
7-2 TR200 Programming Guide