Trane TR200 - Page 287

Environment 4-128
Etr
4-142
Example Of Changing Parameter Data
3-8
Ext. 1 Dif. Gain Limit 21-24
4-176
Ext. 1 Differentation Time 21-23
4-176
Ext. 1 Feedback Source 21-14
4-174
[Ext. 1 Feedback Unit] 21-18
4-175
Ext. 1 Integral Time 21-22
4-176
Ext. 1 Maximum Reference 21-12
4-173
Ext. 1 Minimum Reference 21-11
4-173
Ext. 1 Normal/inverse Control 21-20
4-175
[Ext. 1 Output %] 21-19
4-175
Ext. 1 Proportional Gain 21-21
4-175
Ext. 1 Ref./feedback Unit 21-10
4-172
Ext. 1 Reference Source 21-13
4-174
[Ext. 1 Reference Unit] 21-17
4-175
Ext. 1 Setpoint 21-15
4-175
Ext. 2 Dif. Gain Limit 21-44
4-180
Ext. 2 Differentation Time 21-43
4-180
Ext. 2 Feedback Source 21-34
4-178
[Ext. 2 Feedback Unit] 21-38
4-179
Ext. 2 Integral Time 21-42
4-180
Ext. 2 Maximum Reference 21-32
4-178
Ext. 2 Minimum Reference 21-31
4-178
Ext. 2 Normal/inverse Control 21-40
4-180
[Ext. 2 Output %] 21-39
4-179
Ext. 2 Proportional Gain 21-41
4-180
Ext. 2 Ref./feedback Unit 21-30
4-176
Ext. 2 Reference Source 21-33
4-178
[Ext. 2 Reference Unit] 21-37
4-179
Ext. 2 Setpoint 21-35
4-179
Ext. 3 Dif. Gain Limit 21-64
4-184
Ext. 3 Differentation Time 21-63
4-183
Ext. 3 Feedback Source 21-54
4-182
[Ext. 3 Feedback Unit] 21-58
4-183
Ext. 3 Integral Time 21-62
4-183
Ext. 3 Maximum Reference 21-52
4-182
Ext. 3 Minimum Reference 21-51
4-181
Ext. 3 Normal/inverse Control 21-60
4-183
[Ext. 3 Output %] 21-59
4-183
Ext. 3 Proportional Gain 21-61
4-183
Ext. 3 Ref./feedback Unit 21-50
4-180
Ext. 3 Reference Source 21-53
4-182
[Ext. 3 Reference Unit] 21-57
4-183
Ext. 3 Setpoint 21-55
4-183
Ext. Status Word 16-94
4-149
Ext. Status Word 2 16-95
4-149
Extended Cl Autotuning
4-170
Extended Status Word
5-7
Extended Status Word 2
5-7
External Interlock Delay 22-00
4-184
External Reference 16-50
4-143
F
[Fan 1 Area In2] 20-35 4-164
[Fan 1 Area M2] 20-34
4-164
[Fan 2 Area In2] 20-37
4-164
[Fan 2 Area M2] 20-36
4-164
Fan Control 14-52
4-128
Index
7-4 TR200 Programming Guide