Trane TR200 - Page 78

3-17 Reference 3 Source
Option: Function:
Select the reference input to be used for the third reference signal. par.
3-15
Reference 1 Source, par.3-16 Reference 2 Source and par.3-17 Ref-
erence 3 Source define up to three different reference signals. The sum
of these reference signals defines the actual reference.
This parameter cannot be adjusted while the motor is running.
[0] * No function
[1] Analog input 53
[2] Analog input 54
[7] Pulse input 29
[8] Pulse input 33
[20] Digital pot.meter
[21] Analog input X30/11
[22] Analog input X30/12
[23] Analog Input X42/1
[24] Analog Input X42/3
[25] Analog Input X42/5
[30] Ext. Closed-loop 1
[31] Ext. Closed-loop 2
[32] Ext. Closed-loop 3
3-19 Jog Speed [RPM]
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
3-4* Ramp 1
Configure the ramp parameter, ramping times, for each of the two ramps (par. 3-4* and par. 3-5*).
Parameter Description
TR200 Programming Guide 4-41