EasyManua.ls Logo

Transcend MP840 - Advanced Basic Operations; File Navigation and Recording; Repeat, Lock, and Reset Functions

Transcend MP840
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
File Navigation
Player Controls
Press and Hold the “Menu Switch” inwards (MENU) in the MUSIC, RECORD, VIDEO, PHOTO,
or E-book Mode to enter the File Navigator for that mode.
Make an Audio Recording
Press and Hold the “A-B Repeat / Rec” button for more than 2 seconds in any mode except
the RADIO Mode will activate the MP840’s built-in microphone and begin recording.
Press and Hold the “A-B Repeat / Rec” button for more than 2 seconds during a recording to
stop the recording.
Recorded audio files are saved in the RECORD Mode.
Repeat/Shuffle Functions
Normal, Repeat One, Repeat All, or Shuffle a track and Normal/Repeat/Shuffle tracks in a Folder,
Please see the “REPEAT Mode” in the Settings section for detailed instructions.
A-B Repeat: Repeat a Section of a Track
In the MUSIC, or RECORD Modes’, press the “A-B Repeat / Rec” button once to mark the
beginning of the track you wish to repeat.
Press the “A-B Repeat / Rec” button again to mark the end of the section of the track you wish
to repeat.
The marked section of the track is played as a continuous loop when playing an MP3, WMA,
WMA-DRM10, or WAV track.
Press the “A-B Repeat / Rec” button for a third time to stop the track repeating.
Lock
When the “LOCK” switch is set to the “ON” position, all of the MP840s buttons are disabled.
Reset the MP840
You can Reset the unit by pressing the “Reset” button for 3 to 5 seconds.

Table of Contents

Related product manuals