8000 SERIES OPERATION MANUAL TRANSMILLE LTD.
TRANSMILLE LTD. PAGE 11
Rear Panel Connections and controls
Connections on the rear panel are for Line Power via a 3 Pin IEC connector incorporating the Line
fuse and on-off switch -note the mains inlet is filtered.
The multiple interface connections are available including RS232, USB, GPIB and Ethernet (LAN)
These interfaces are optically isolated from the multimeter output.
A set of rear panel terminals are fitted as standard, including voltage, current (to 1A) and a guard
terminal. The 1 A range + and – fuses are located below the current terminals (1A Q.B.)
Power Switch /
Input Fuse / Inlet
Interface Connections
RS232 / Ethernet / GPIB
Rear Panel Input
Terminals
1A Range Fuses
Pressure Adapter
Input
To Next Page
Loading...