8000 SERIES OPERATION MANUAL TRANSMILLE LTD.
TRANSMILLE LTD. PAGE 53
RESPONSE CODES
The 8000 Series multimeters will respond to any command with a fixed code beginning with an star
(*) - the codes are listed below
Response Code Description
*0 OK
*1 ERROR IN COMMAND LINE
*2 ERROR IN RANGE COMMAND
*3 ERROR IN FREQUENCY COMMAND
*4 ERROR IN O/P COMMAND
*5 ERROR IN CAL FACTOR SENT
*6 ERROR IN CAL FACTOR COMPARE
*7 COMMAND OUT OF RANGE ( A1,A2 ETC ) OR PASSWORD
NOT SET
*8 10A/HV TIMEOUT or OVER TEMPERATURE
*9 INVALID COMMAND
To Next Page
Loading...