TRENDnet TV-IP321PI - Page 38

TRENDnet User’s Guide TV-IP321PI
© Copyright 2015 TRENDnet. All Rights Reserved. 38
SNMP V1/V2
Enable
SNMPv1:
Check this box to enable SNMP v1 management.
Enable
SNMPv2c:
Check this box to enable SNMP v2c management.
Read SNMP
Community:
Specify the password to access the SNMP
community for read only access.
Write SNMP
Community:
Specify the password for access to the SNMP
community with read/write access.
Trap Address:
Specify the IP address for the SNMP trap
community.
Trap Port:
Specify the port number for the SNMP trap
community.
Trap
Community:
Specify the name of SNMP trap community.
SNMP V3
Enable
SNMPv3:
Check this box to enable SNMP v3 management.
Read User
Name:
SNMP v3 member user name.
Security Level:
Choose one of the security levels.
Authentication
Algorithm:
Choose the authentication method to verify the
source of information: MD5 or SHA.
Authentication
Password:
Specify the authentication password between 8 to
32 letters.
Private-key
Algorithm:
Choose the privacy key to encrypt SNMP
messages: DES or AES.
Private-key
Password:
Specify the privacy key between 8 to 32 letters.
Write User
Name:
SNMP v3 manager user name.
Security Level:
Choose one of the security levels.
Authentication
Algorithm:
Choose the authentication method to verify the
source of information: MD5 or SHA.
Authentication
Password:
Specify the authentication password between 8 to
32 letters.
Private-key
Algorithm:
Choose the privacy key to encrypt SNMP
messages: DES or AES.
Private-key
Password:
Specify the privacy key between 8 to 32 letters.
SNMP Other Settings
SNMP Port:
SNMP service port number.
Click Save to save the changes