FMS-2000M
LIT-12013580
13
Initial setup
specify the isolation mode available to restricted level users. See Table 4
• Positive and neutral isolation mode
• Negative and neutral isolation mode
• Positive, negative, and neutral isolation mode
Note: Positive, negative, and neutral isolation mode is available for rare situations where a room can be either positive or negative.
Completing the initial setup
The FMS-2000M display boots up in portrait orientation by default. You can change this to landscape orientation in the initial setup in
Language screen.
1. On the Language screen, scroll to your preferred language and tap the Checkmark icon.
2. On the Global screen, expand Units and tap to select whether values display as Imperial or Metric.
3. Expand Device Orientation and tap to select Portrait or Landscape screen orientation.
4. Collapse Device Orientation and tap the Checkmark icon to save the settings.
5. On the Isolation Mode screen, choose from the following options:
• Positive & Negative
• Positive Only
• Negative Only
6. Tap the Checkmark icon to save the settings.
7. Tap Proceed to complete the initial setup.
Note: At any time you can make changes to your inital settings in the Settings menu.
Isolation mode Denition
Positive isolation mode The differential pressure of the monitored space is positive with respect to the reference space.
Negative isolation mode The differential pressure of the monitored space is negative with respect to the reference space.
Neutral isolation mode The differential pressure of the monitored space is zero or near zero with respect to the reference space.
Table 4:
To Next Page
Loading...
Need help?
General