FMS-2000M
This product is covered by a limited warranty. Contact your representative/branch for more details.
Software terms
Product warranty
Contact information
www.johnsoncontrols.com/locations
www.johnsoncontrols.com/contact-us
Patents: https://jcipat.com
Patents
Use of the software that is in (or constitutes) this product, or access to the cloud, or hosted services applicable to this product, if any, is subject to
applicable end-user license, open-source software information and other terms set forth at www.johnsoncontrols.com/techterms. Your use of this product
constitutes an agreement to such terms.
Cleaning the display
1. Use a dry or lightly dampened cloth with a mild cleaner or ethanol.
2. Make sure the cloth is only lightly dampened, not wet.
3.
IMPORTANT:
• Do not apply cleaner directly to the touch panel surface. If cleaner spills onto the touch panel, soak up the cleaner immediately
with an absorbent cloth.
• Do not use cleaner that is either acid or alkali. Use neutral pH cleaner.
• Do not use organic chemicals such as: paint thinner, acetone, tolulene, xylene, propyl or isopropyl alchohol, or kerosene.
IMPORTANT :
• N’appliquez pas de nettoyant directement sur la surface du panneau tactile. Si du nettoyant pénètre dans le panneau tactile,
• N’utilisez aucun nettoyant qui est acide ou alcalin. Utilisez un nettoyant dont le pH est neutre.
• N’utilisez pas de produits chimiques organiques comme le diluant pour peinture, l’acétone, le toluène, le xylène, l’alcool
propylique ou isopropylique, ou le kérosène.
North American Emissions Compliance
United States
Canada
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause harmful interference, in which case users will be required to
correct the interference at their own expense.
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
To Previous Page
Loading...
Need help?
General