CLASS B
+
& C MOTORHOME
91
13.15 ELECTRIC STEP
See step Owner's Manual in the Owner's Information Package for
detailed operating instructions .
Normal Operation - Step switch in “on” position (located on switch
panel beside door entrance). Open the door. The step should
descend and lock in extended position with the understep light on.
Close the door. The step should retract and lock in up position.
1. Step Locked in Down Position:
Open the door and allow step to descend. Flip switch to o.
The step should remain in down position with the understep
light o when the door is closed.
2. Ignition Safety System:
When the ignition switch is turned on, step will activate with door movement, regardless of door switch position.
Periodic maintenance including lubrication and cleaning are necessary to keep the step functioning properly.
13.16 SCREEN WINDOWS
The screen windows have been designed so that the screen may be removed. To remove the screen, push it up and pull it
out at the bottom.
STEP
SCREEN WINDOWS
To Next Page
Loading...
