When the electricity supply
to the shower is switched
on at the isolating switch,
the power indicator will
light.
To start the shower
Press the start/stop bar and
water will flow.
After a few seconds a flow
of heated water
will be available.
To stop the shower
(manually)
The shower can be stopped
by pressing the START/
STOP bar. When pressed,
the phased shutdown will
begin and water will cease
to flow after a few seconds.
Fig.A
Start/Stop bar
Power On indicator
Low Flow indicator
Timed Shutdown
indicator
Temperature control
(knob or Lever,
depending on model)
HOW TO OPERATE THE SHOWER