Job Control® Vision, UniDrive, MCO option for pad cuttingHoneycomb
cutting table top with 0.5 in (12.7 mm) or 0.25 (6,4 mm) nominal comb size
Cone, roll or combined version, tiltable
Max. workpiece length cones: 21.6 in (550 mm)
Max. workpiece length rolls: Ø ≥ 2.2 in (58 mm) = 26.7 in (679 mm), Ø ≤ 2.2
in (58 mm) = 29.3 in (745 mm)
Max. workpiece diameter cones: 8.1 in (207 mm), depending on inserted
lens
Max. workpiece diameter rolls: 3.7 in (96 mm), depending on inserted lens
Registration marks detection and compensation system
Max. working area without camera: 32 20 in (813 508 mm)
Max working area with camera: 31.5 20 in (801 508 mm)
Vacuum effect for fixation of thin or wavy materials
Honeycomb cutting tabletop
Perfect in combination with vacuum table;
0.5 in (12.7 mm) or 0.25 (6,4 mm) nominal comb size
Ferromagnetic engraving
table
Allows to mount thin materials such as paper, films or foils with magnets to
ensure an even and flat surface. An even working is essential for achieving
optimal results for laser engraving and marking applications
Acrylic cutting grid table
For reflection-free cutting of tasks with parts smaller than 4 in (100 mm)
Aluminum slat cutting table
Particularly suitable for cutting tasks of thicker materials and parts bigger
than 4 in (100 mm); removable aluminum slats
Acrylic slat cutting table
For reflection-free cutting for tasks with thicker materials and parts bigger
than 4 in (100 mm); removable acrylic slats
Gas-Kit light (for
compressed air connection)
For control of compressed air (free of mechanical dust, water and oil) max.
flow rate 150 l/min (40 gpm) with max. 10 bar (145 psi); max. limit 4 bar on
working head, connection on the machine with external hose diameter of
0.23 in (6mm)
Increased flexibility by the use of different operating systems e.g. MAC and
multiple design stations, workflow optimization
CAD / CAM software for perfect cutting results; including nesting-function,
lead-in/lead-out, tool paths
Multi-Color Option for stamp pad cutting
To Next Page
Loading...
Need help?
General
