Troxler EGauge 4590 User Manual

5–8
NOTE
If a Model 4590 equipped with the GPS option is
moved a long distance between uses, the GPS system
must be allowed to initialize. In some instances,
initialization may take as long as 30 to 45 minutes
from the time the gauge is powered on with the GPS
enabled. Note also that the gauge must be positioned
such that the GPS receiver can receive signals from
the GPS satellites (see Appendix H for more
information). If the GPS does not initialize within 45
minutes, contact your Troxler representative.
Moisture Input
To select how you want to input moisture values, press 〈2〉 from
the Options menu shown on the previous page. The gauge
displays:
 Press 〈1〉 to use an external sensor. Choose this option to
use the provided moisture probe. The gauge displays a
confirmation message and returns to the Moisture Input
menu.
 Press 〈2〉 to input the value manually. Choose this option
to input your percent moisture with each measurement
result. An alternative method will be needed to
determine the soil moisture content. The gauge displays a
confirmation message and returns to the Moisture Input
menu.
 Press 〈3〉 to disable the moisture input feature. Results
provide wet density only. The gauge displays a
confirmation message and returns to the Moisture Input
menu.
-Moisture Method-
1. External Sensor
2. Manual Input
3. None

Troxler EGauge 4590 Specifications

General

Brand	Troxler
Model	EGauge 4590
Category	Measuring Instruments
Language	English