Measurement Order
To select what order the measurements are taken, press 〈3〉
from the Options menu. The gauge displays:
Press 〈1〉 to take moisture measurements with the
included probe first. The gauge displays a confirmation
message and returns to the Measurement Order menu.
Press 〈2〉 to take density measurement readings first. The
gauge displays a confirmation message and returns to the
Measurement Order menu.
Battery Preference
To switch from NiMH battery power to the Alkaline battery
backup, press
〈4〉 from the Options menu. The gauge displays:
Press 〈1〉 to select the rechargeable NiMH batteries. The
gauge displays a confirmation message and returns to the
Battery Preference menu.
Press 〈2〉 to select the Alkaline battery backup. For
instructions on installing these batteries, see page
A-11.
The gauge displays a confirmation message and returns
to the Battery Preference menu.
1. Moisture First
2. Gauge First
-Battery Preference-
1. Rechargeable NiMH
2. Alkaline
To Next Page
Loading...
