Reviewing the Drift Test
To review the results of the drift stat test, press 〈2〉 at the Drift
Test menu. The gauge displays the results of the density drift
test.
Printing the Drift Test
To print the results of the last drift test to a serial printer or
computer via the gauge’s 9-pin serial port, press
〈3〉 at the Drift
Test menu. The gauge prompts the operator to connect the
printer to the gauge.
Connect the serial cable to the printer or computer serial port.
Press
〈ENTER/START〉. The gauge prints or uploads the drift
test data and returns to the Drift Test menu.
NOTE
Gauge Serial Communications Cable is Part Number
113128.
To Next Page
Loading...
