TSC DA220 Series User Manual

- 17 -
3.2.4 Loading Media in Cutter Mode (Option for DA220 series)
1. Please refer to section 3.2.1 to load the
media. Lead the paper through the cutter
paper opening.
2. Close the top cover gently.
3. Use “Diagnostic Tool” to set the media
sensor type, calibrate the selected sensor
and set the post-print action to “CUTTER”.

TSC DA220 Series Specifications

General

Resolution	203 dpi / 300 dpi
Print Speed	Up to 152.4 mm (6”) per second
Print Width	54 mm (2.12”)
Memory	8 MB SDRAM
Processor	32-bit RISC
Interface	USB
Operating Temperature	-40°C to 60°C
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)
Power Supply	100-240V AC, 50/60 Hz