TSC MH341 Series User Manual

- 46 -
Head Close
This option is used to set the action of the media when
you close the print head.
Selections
Description
Feed
Printer will advance one label
Calibration
Printer will calibration the sensor levels,
determine length and feed label
Length
Printer determine length and feed label
No Motion
Printer will not move media
No Motion
Label Top
This option is used to adjust print position vertically on
the label. The range is -120 to +120 dots.
0
Left Position
This option is used to adjust print position horizontally on
the label. The range is -9999 to +9999 dots.
0
Reprint Mode
When reprint mode is enabled, you can reprint the last
label printer by pressing button on printer’s control
panel.
Disable
Format Convert
Selects the bitmap scaling factor. The first number is the
original dots per inch (dpi) value; the second, the dpi to
which you would like to scale.
None
Note: If printing from enclosed software/driver, the software/driver will send out
the commands, which will overwrite the settings set from the panel.

TSC MH341 Series Specifications

General

Brand	TSC
Model	MH341 Series
Category	Printer
Language	English