TSC TTP-2610MT Series - 1.4 Ribbon Specification; 1.5 Media Specification

6
1.4 Ribbon Specification
Ribbon Specifications
Ribbon outside diameter
Max. OD 90 mm
Ribbon length
450 meter
Ribbon core inside diameter
1” core (25.4 mm)
Ribbon width
50.8~178 mm (2”~7”)
Ribbon wound type
Ink coated inside/ outside
Note: Support color ribbon
1.5 Media Specification
Media Specifications
203 dpi models
300 dpi models
Label roll capacity
208.3 mm (8.2”) OD
Media alignment
Edge alignment
Media type
Continuous, die-cut, black mark, fan-fold, notch
Media wound type
Printing face outside wound
Media width
50.8 ~ 172.7 mm (2” ~ 6.8”)
Media width (cutter mode)
0.06 ~ 0.254 mm (2.36 ~ 10 mil)
Media thickness
76.2 mm (3”)
Media core diameter
Min. 10 mm (0.39”)
Media length
25.4~5,080 mm (1” ~ 200”)
Media length
(cutter mode)
25.4~152.4 mm (1”~6”)
Gap height
Min. 2 mm
Black mark height
Min. 2 mm
Black mark width
Min. 8 mm (0.31”)