TSC TTP-2610MT Series User Manual

24
4. Knob Adjustment
There are conditions that will need to adjust the print head pressure.
 Print with thick media
If media thickness is larger than 0.19 mm, the larger pressure is required to
get good quality printout.
 Ribbon wrinkle presented on the media
There are 5 levels of pressure for adjustment. Level 1 is the minimum pressure and
level 5 is the maximum pressure. Please refer to next section for more information.

TSC TTP-2610MT Series Specifications

General

Brand	TSC
Model	TTP-2610MT Series
Category	Barcode Reader
Language	English