TSC TTP-2610MT Series User Manual

18
4. Pull label roll leading edge forward through the
media guide bar, damper, media sensor and place
the label leading edge onto the platen roller. Adjust
the rear label guide (green) to fit the width of the
label.
5. Making sure the label is into both label guides.
6. Close the print head mechanism. Make sure the
latches are engaged securely.
7. Using the front display panel, set media sensor
type and calibrate the selected sensor.

TSC TTP-2610MT Series Specifications

General

Brand	TSC
Model	TTP-2610MT Series
Category	Barcode Reader
Language	English