TSC TTP-2610MT Series User Manual

45
Media Power Up
Set the action of the media when turning on the printer.
Feed: Printer will advance one label.
Calibration: Printer will make calibration.
Length: Printer determine length and feed label.
No Motion: Printer will not move media.
No Motion
Head Close
Set the action of the media when closing the print head.
Feed: Printer will advance one label.
Calibration: Printer will make calibration.
Length: Printer determine length and feed label.
No Motion: Printer will not move media.
No Motion
Label Top
Adjust print position vertically on the label. Value range: -120 to +120 dots.
0
Left Position
Adjust print position horizontally on the label. Value range:-9999 to +9999 dots.
0
Reprint Mode
Reprint the last label by pressing button on printer’s control panel.
Disabled
Format Convert
Select the bitmap scaling factor. The first number is the original dots per inch (dpi) value; the
second the dpi which you would like to scale.
None
Note: printing from other software/drive will overwrite the settings set from the panel.

TSC TTP-2610MT Series Specifications

General

Brand	TSC
Model	TTP-2610MT Series
Category	Barcode Reader
Language	English