“9” or “dot” to “mm”. Press the button to set the value into printer. Press
key to cancel the setting and return to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send
out the command, which will overwrite the setting set from the front
panel.
3.1.1-2.6 List Fonts:
This feature is used to print current printer available fonts list to the label. The fonts
stored in the printer’s DRAM, Flash or optional memory card. Press
button to print the list.
3.1.1-2.7 List Images:
This feature is used to print current printer available images list to the label. The
images stored in the printer’s DRAM, Flash or optional memory card. Press
button to print the list.
3.1.1-2.8 List Formats:
This feature is used to print current printer available formats list to the label. The
formats stored in the printer’s DRAM, Flash or optional memory card. Press
button to print the list.
To Next Page
Loading...
Need help?
General
