TSC TTP-268M User Manual

37
move the cursor from left digit to right digit, and press the button to set the
value from “+” to “-” or “0” to “9”. Press the button to set the value into
printer. Press key to cancel the setting and return to the previous menu.
The default value is +000.
Note: If printing from enclosed software/driver, the software/driver will send
out the command, which will overwrite the setting set from the front
panel.
3.1.1-2.4 Print Mode: (Tear Off / Peel Off / Cutter)
This option is used to set the print mode. Printer default setting is Tear Off. When
enter this list, the print mode in the right side of “ >” icon is the printer current
setting. Press and to select the different print mode and press
button to enable the setting. Press key to cancel the setting
and return to the previous menu.
Printer Mode
Description
Tear Off
Next label top of form is aligned to the print head burn line
location.
Peel Off
Enable the label peel off mode.
Cutter
Enable the label cutter mode.
Note: If printing from enclosed software/driver, the software/driver will send
out the command, which will overwrite the setting set from the front
panel.
3.1.1-2.5 Print Width:
This option is used to set print width. Press the button to move the cursor
from left digit to right digit, and press the button to set the value from “0” to
Print Setup 4/17
Print Speed
Tear Off
>
Print Mode
Print Mode 1/4
>
Tear Off
Peel Off
Cutter
Print Setup 5/17
Tear Off
Print Mode
>
Print Width
Print Width
812 dot

TSC TTP-268M Specifications

General

Brand	TSC
Model	TTP-268M
Category	Barcode Reader
Language	English