TSC TTP-268M User Manual

40
3.1.1-2.12 Delimiter Char:
This option is used to set delimiter character. Press the button to move
the cursor from left digit to right digit, and press the button to set the value
from “0” to “9” or “A” to “F”. Press the button to set the value into printer.
Press key to cancel the setting and return to the previous menu.
3.1.1-2.13 Media Power Up:
This option is used to set the action of the media when you turn on the printer.
Printer default setting is No Motion. When enter this list, the print mode in the right
side of “ >” icon is the printer current setting. Press and to select
the different print mode and press button to enable the setting. Press
key to cancel the setting and return to the previous menu.
Selections
Description
Feed
Printer will advance one label
Calibration
Printer will calibration the sensor levels, determine length
and feed label
Length
Printer determine length and feed label
No Motion
Printer will not move media
3.1.1-2.14 Head Close:
Print Setup 12/17
Control Prefix
Format Prefix
>
Delimiter Char
Delimiter Char
< , > 2CH
Print Setup 13/17
Format Prefix
Delimiter Char
>
Media Power Up
Media Power U 4/5
Length
>
No Motion
Exit
Print Setup 14/17
Delimiter Char
Media Power Up
>
Head Close
Head Close 4/5
Length
>
No Motion
Exit

TSC TTP-268M Specifications

General

Brand	TSC
Model	TTP-268M
Category	Barcode Reader
Language	English