This option is used to set the action of the media when you close the printhead.
Printer default setting is No Motion. When enter this list, the print mode in the right
side of “ >” icon is the printer current setting. Press and to select
the different print mode and press button to enable the setting. Press
key to cancel the setting and return to the previous menu.
3.1.1-2.15 Label Top:
This option is used to adjust print position vertically on the label. Press the
button to move the cursor from left digit to right digit, and press the
button to set the value from “+” to “-” or “0” to “1/2”. Press the button to
set the value into printer. Press key to cancel the setting and return to
the previous menu. The default value is +000 and range is -120 to +120 dots.
3.1.1-2.16 Left Position:
This option is used to adjust print position horizontally on the label. Press the
button to move the cursor from left digit to right digit, and press the
button to set the value from “+” to “-” or “0” to “9”. Press the button to set
the value into printer. Press key to cancel the setting and return to the
previous menu. The default value is +0000 and range is -9999 to +9999 dots.
To Next Page
Loading...
Need help?
General
